Additional Images

Injen Race Series Full Exhaust System - SES2300RS

2020-2023 Toyota GR Supra MK5 L6-3.0L Turbo (A90/A91)
Pricing: $694.95

Free Ground Shipping on orders over $200.00- 48 continental states


The legendary Toyota Supra has returned for 2020! A legend only deserves the best and the Injen Race Series Cat-Back Single-Exit Exhaust System Delivers! Specifically engineered for the 2020-2023 Toyota GR Supra equipped with the L6-3.0L Turbo, this system was designed from the ground up to compliment the aggressive styling and blistering performance of these sporty sedans. Our race inspired single-exit design hones the tone of the engine into an ear-pleasing symphony. Purposefully delivering a crisp, clean, deep rumble at idle and an aggressive roar when you’re pushing the limits.

Massive 3.50in (89mm) tubing makes up the entire exhaust, from the front section all the way back to the tip-less exit point. This exhaust eliminates all factory mufflers, resonators, and valves for race inspired weight reduction and sound. Outstanding flow from the 3.5in tubing will let that turbo breathe and the open exhaust design will deliver an aggressive, throaty, crackling exhaust tone that will keep you smiling from ear to ear.

We design every performance product with ease of installation in mind and this exhaust is no different. On the SES2300RS we’ve included V-Band clamps and flanges for the simplest, quickest installation possible. No need for any cutting, drilling, or modification of the vehicle to complete installation. The system uses all factory mounting points for simple and convenient placement and compatibility.

An aftermarket exhaust system is one of the simplest modifications you can make to your vehicle that will add both power and personality to your ride. We make choosing an exhaust system easy with our superior build quality, tone, and performance. All protected by the world renowned Injen Limited Lifetime Warranty.

Prop 65 Compliance

This product can expose you to chemicals including Chromium, Nickel & Cobalt, which are known to the State of California to cause cancer.


SES Intercooler and exhaust systems that have been installed will not be eligible for return under any circumstances. Injen Technology offers a Limited Lifetime Warranty to the original purchaser against defects in material and workmanship. Injen Technology will replace, at no charge, any Injen product considered by Injen Technology to be defective. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology’s discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, damages caused from improper installation, nor does it cover the cost of installation or removal of the defective part or its replacement. All warranty items must be sent freight prepaid with a valid RMA (Return Merchandise Authorization) number and copy of original invoice. Most exhaust and Intercooler system installations may require a lift and or specialized tools. Due to the installation complexity of automotive exhaust and Intercooler systems, Injen Technology recommends that a qualified technician perform the installation. Most local Tuner or exhaust and muffler shops offer professional installation.

Key Features

  • Direct fit for
    2020-2023 Toyota GR Supra L6-3.0L Turbo (A90/A91)
  • Dyno Proven power increase of 10 HP and 11 Lb.-Ft. of torque at the wheels
  • Race-inspired single exit design
  • Manufactured from huge, mandrel-bent, 304 stainless-steel tubing
  • Race Exhaust design that eliminates all factory mufflers, resonators, and valves for race inspired weight reduction and sound
  • A savings of over 20lbs when compared to the stock exhaust system!
  • No-tip racing design that utilizes oversized 3.50in tubing the entire length of the exhaust
  • Beautiful V-Band clamps used for a simple, leak-free installation
  • Increase Throttle Response and Decreases Turbo Lag
  • Hand Crafted and TIG Welded to Perfection for Strength and Durability
  • Uses all factory mounting locations with factory-style hangers
  • Includes all necessary hardware for a hassle-free installation
  • Designed and manufactured in Pomona, CA

This part is not an emissions-related part and therefore can be used on Emission Controlled Vehicles without a CARB EO#.

Additional Parts available for the GR Supra:
SES2300CF Dual Carbon Fiber tip Exhaust
SES2300TT Dual Titanium tip Exhaust
EVO2300 Rotomolded Cold Air Intake
SP2300 Traditional Aluminum Intake
SES2300ICP Intercooler Charge Pipes
PT0008B X-Pedal Throttle Controller


  • SES2300RS
  • SES2300RS
  • 843115029166
  • Injen Technology
  • New


Shipping Information

  • Item Requires Shipping
  • 36.0 lbs.
  • W43.0000” x H26.0000” x L11.0000”
  • Free Ground Shipping on orders over $200.00- 48 continental states

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.