Additional Images

Injen Race Series Full Exhaust System - SES9300RS

SES9300RS
2021-2024 Ford Bronco L4-2.3L Turbo EcoBoost
2021-2024 Ford Bronco V6-2.7L Twin Turbo EcoBoost
Limited Supply
Availability: NOTE: MAY TAKE UP TO 60 DAYS FOR PRODUCTION
Pricing: $599.95

Qty:
Free Ground Shipping on orders over $200.00- 48 continental states

Description

The legendary Ford Bronco has finally returned and while the wait was long, it was definitely worth the wait! A true legend like the Ford Bronco only deserves the best sounding, highest flowing exhaust and the Injen Technology SES9300RS Race Series Cat-Back Exhaust System delivers.

The Injen Technology SES9300RS Race Series exhaust system was designed from the ground up to compliment the aggressive styling and blistering performance of these sporty off-road beasts.  Not only does this exhaust fit both 2-door and 4-door models, the SES9300RS also fits either the 2.3L Turbo or the 2.7L Twin Turbo with no additional modifications. Our straight through, single exit design was developed to give you the most exhaust flow out of any cat-back system found in the market today.

The entire length of the SES9300RS was constructed from massive 3.00in (76mm) mandrel-bent 304 stainless-steel tubing. This massive tubing allows those turbos to breathe and perform at their peak efficiency. The rear section consists of a race inspired 3.00in (76mm) mandrel bent tube that tucks into the undercarriage for the most ground clearance possible. It's single exit, straight through tip is designed to give you the most exhaust flow and yields an aggressive, race inspired, deep exhaust tone.

Injen Technology designs every performance product with ease of installation in mind and this exhaust is no different. On the SES9300RS we’ve included high quality exhaust band clamps for the simplest, quickest installation possible. No need for any cutting, drilling, or modification of the vehicle to complete installation. The system uses all factory mounting points for simple and convenient placement and compatibility. To increase performance, we opted for a single 3.00in (76mm) pipe size from flange to tip to keep flow rates consistent. Keeping the flow rate consistent not only adds performance but also helps keep the tone of the exhaust where we designed it to be throughout the RPM range.

An aftermarket exhaust system is one of the simplest modifications you can make to your vehicle that will add both power and personality to your ride. We make choosing an exhaust system easy with our superior build quality, tone, and performance. All protected by the world renowned Injen Limited Lifetime Warranty.

 

Prop 65 Compliance

This product can expose you to chemicals including Chromium, Nickel & Cobalt, which are known to the State of California to cause cancer.

Warranty

SES Intercooler and exhaust systems that have been installed will not be eligible for return under any circumstances. Injen Technology offers a Limited Lifetime Warranty to the original purchaser against defects in material and workmanship. Injen Technology will replace, at no charge, any Injen product considered by Injen Technology to be defective. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology’s discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, damages caused from improper installation, nor does it cover the cost of installation or removal of the defective part or its replacement. All warranty items must be sent freight prepaid with a valid RMA (Return Merchandise Authorization) number and copy of original invoice. Most exhaust and Intercooler system installations may require a lift and or specialized tools. Due to the installation complexity of automotive exhaust and Intercooler systems, Injen Technology recommends that a qualified technician perform the installation. Most local Tuner or exhaust and muffler shops offer professional installation.

Direct Fitment

Year Make Model Engine
2021FordBroncoL4-2.3L Turbo
2021FordBroncoV6-2.7L Twin Turbo
2022FordBroncoL4-2.3L Turbo
2022FordBroncoV6-2.7L Twin Turbo
2023FordBroncoL4-2.3L Turbo
2023FordBroncoV6-2.7L Twin Turbo
2024FordBroncoL4-2.3L Turbo
2024FordBroncoV6-2.7L Twin Turbo

Key Features

  • Direct fit for
  • 2021-2024 Ford Bronco L4-2.3L Turbo
    2021-2024 Ford Bronco V6-2.7L Twin Turbo
  • Fits both 2-door and 4-door models without modifications
  • Dyno Proven power increase of 9 HP and 11 Lb.-Ft. of torque at the wheels
  • Straight through, single exit design developed for maximum exhaust flow
  • Manufactured from huge 3.0in (76mm) mandrel-bent 304 stainless-steel tubing
  • High-tuck design for increased ground clearance
  • Oversized tubing reduces restriction providing increased airflow and performance
  • Increase Throttle Response and Decreases Turbo Lag
  • Hand Crafted and TIG Welded to Perfection for Strength and Durability
  • Uses all factory mounting locations with factory-style hangers
  • Includes high quality band clamps for a simple, leak-free installation
  • Designed and manufactured in Pomona, CA

EMISSIONS

Note: This part is not an emissions-related part and therefore can be used on Emission Controlled Vehicles without a CARB EO#


EXHAUST OPTIONS


ACCESSORIES

Video

Details

  • SES9300RS
  • SES9300RS
  • 843115029531
  • Injen Technology
  • NOTE: MAY TAKE UP TO 60 DAYS FOR PRODUCTION
  • New

Categories

Shipping Information

  • Item Requires Shipping
  • 30.0 lbs.
  • W18.0000” x H12.0000” x L58.0000”
  • Free Ground Shipping on orders over $200.00- 48 continental states

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.