Additional Images

Injen SES Intercooler Pipes (Wrinkle Red) - SES9004ICPWR

2017-2022 Ford F-250 Super Duty V8-6.7L(td)
2017-2022 Ford F-350 Super Duty V8-6.7L(td)
2017-2022 Ford F-450 Super Duty V8-6.7L(td)
2017-2022 Ford F-550 Super Duty V8-6.7L(td)
Pricing: $674.95

Free Ground Shipping on orders over $200.00- 48 continental states


Injen Technology has done it once again with this amazing Charge Pipe system for the 2017-2022 Ford Super Duty Trucks equipped with the 6.7L Power Stroke Diesel. This complete set replaces both the hot side and the cold side charge pipes, giving you a complete engineered set for maximum performance.

This upgraded charge pipe system is manufactured from oversized mandrel-bent 6061 aluminum and every bend and TIG weld is completed by hand at the Injen Technology headquarters in Pomona, California. The Injen hot-side pipe has an ID of 3.00in and the cold side has an ID of 3.25in. By utilizing oversized piping on both the hot side and the cold side, these charge pipes are able to reduce restriction, balance the airflow in and out of the intercooler to improve performance, and lower engine damaging exhaust gas temperatures (EGTs).

Most importantly, the restrictive OEM cold side pipe is prone to splitting without warning. When your OEM system splits, you lose boost pressure and it can leave you stranded at any moment. Take that worry away while adding some performance and longevity to your truck by installing the Injen Technology charge pipe system today!

Prop 65 Compliance

This product can expose you to chemicals including Chromium, Nickel, Carbon Black, Bisphenol A/Epichclorohydrin Polmer & Cobalt, which are known to the State of California to cause cancer, and (Antimony [Oxide], Arsenic, Beryllium. Chromium (hexavalent), Cobalt Cadmium, Lead, and Nickel which is known to the State of California to cause birth defects or other reproductive harm.

Key Features

  • Direct fit For:
  • 2017-2022 Ford F-250 V8-6.7L Turbo Diesel
    2017-2022 Ford F-350 V8-6.7L Turbo Diesel
    2017-2022 Ford F-450 V8-6.7L Turbo Diesel
    2017-2022 Ford F-550 V8-6.7L Turbo Diesel

  • Complete system including both HOT and COLD side piping
  • Pairs perfectly with Injen’s EVO9004 & EVO9007 cold air intakes
  • Cold Side Pipe Inside Diameter - 3.250in
  • Hot Side Pipe Inside Diameter - 3.00in
  • Manufactured from Mandrel-Bent 6061 Aluminum
  • Cold side pipe is 2-pieces for easier installation
  • Precision CNC machined factory-style quick connections utilizing the OE spring clip
  • Works seamlessly with the OE intercooler
  • Available in three finishes
  • Stainless Steel Band Clamps with Inner Protective Liner
  • Automotive Grade Reinforced Silicone Couplers
  • Unique Injen Logo Plate for a Refined Style
  • Increase Throttle Response and Decreases Turbo Lag
  • Beaded Tube Ends to Help Prevent Couplers from Coming Off
  • Uses all factory mounting locations
  • Includes all necessary hardware for a hassle-free installation
  • Made in Pomona California, USA
  • Injen Technology Limited Lifetime Warranty

This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.


Note: Finish may differ from picture shown. Click Here to Learn More


  • 2017-2019 Ford Super Duty
  • Dry Air Filter: EVO9004
    Oiled Air Filter: EVO9004C

  • 2020-2022 Ford Super Duty
  • Dry Air Filter: EVO9007
    Oiled Air Filter: EVO9007C


SES Intercooler and exhaust systems that have been installed will not be eligible for return under any circumstances. Injen Technology offers a Limited Lifetime Warranty to the original purchaser against defects in material and workmanship. Injen Technology will replace, at no charge, any Injen product considered by Injen Technology to be defective. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology’s discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, damages caused from improper installation, nor does it cover the cost of installation or removal of the defective part or its replacement. All warranty items must be sent freight prepaid with a valid RMA (Return Merchandise Authorization) number and copy of original invoice. Most exhaust and Intercooler system installations may require a lift and or specialized tools. Due to the installation complexity of automotive exhaust and Intercooler systems, Injen Technology recommends that a qualified technician perform the installation. Most local Tuner or exhaust and muffler shops offer professional installation.


  • SES9004ICPWR
  • SES9004ICPWR
  • 843115029593
  • Injen Technology
  • New


Shipping Information

  • Item Requires Shipping
  • 8.0 lbs.
  • W14.0000” x H9.0000” x L26.0000”
  • Free Ground Shipping on orders over $200.00- 48 continental states

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.