The legendary Toyota Supra has returned for 2020! A legend only deserves the best and the Injen Performance Cat-Back Exhaust System for the 2020-2022 Toyota GR Supra equipped with the L6-3.0L Turbo was designed from the ground up to compliment the aggressive styling and blistering performance of these sporty sedans. Our custom dual muffler design hones the tone of the engine into an ear-pleasing symphony. Purposefully delivering a crisp, clean, deep rumble at idle and an aggressive roar when you’re pushing the limits.
Massive 3.50in (89mm) tubing makes up the front and mid-section, while the rear section is constructed of huge 3.00in (76mm) tubing. The premium polished finish on the mufflers are sure to impress anyone curious enough to take a look at the undercarriage and the beautiful 4.5in (114mm) carbon fiber exhaust tips offer superb aesthetics that perfectly compliment the sound of the system itself.
We’ve included an exhaust valve that utilizes the stock motor (not included). Once the user switches to Sport mode, the true level of performance and sound this exhaust provides will be achieved. Outstanding flow from the 3.5in tubing will let that turbo breathe and the open exhaust valve will deliver an aggressive, throaty, crackling exhaust tone that will keep you smiling from ear to ear.
We design every performance product with ease of installation in mind and this exhaust is no different. On the SES2300CF we’ve included V-Band clamps and flanges for the simplest, quickest installation possible. No need for any cutting, drilling, or modification of the vehicle to complete installation. The system uses all factory mounting points for simple and convenient placement and compatibility. To increase performance, we opted for a stepped piping design that keeps the flow rate consistent throughout the length of the exhaust. Keeping the flow rate consistent not only adds performance but also helps keep the tone of the exhaust where we designed it to be throughout the rev range.
An aftermarket exhaust system is one of the simplest modifications you can make to your vehicle that will add both power and personality to your ride. We make choosing an exhaust system easy with our superior build quality, tone, and performance. All protected by the world renowned Injen Limited Lifetime Warranty.
Prop 65 Compliance
This product can expose you to chemicals including Chromium, Nickel & Cobalt, which are known to the State of California to cause cancer.
SES Intercooler and exhaust systems that have been installed will not be eligible for return under any circumstances. Injen Technology offers a Limited Lifetime Warranty to the original purchaser against defects in material and workmanship. Injen Technology will replace, at no charge, any Injen product considered by Injen Technology to be defective. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology’s discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, damages caused from improper installation, nor does it cover the cost of installation or removal of the defective part or its replacement. All warranty items must be sent freight prepaid with a valid RMA (Return Merchandise Authorization) number and copy of original invoice. Most exhaust and Intercooler system installations may require a lift and or specialized tools. Due to the installation complexity of automotive exhaust and Intercooler systems, Injen Technology recommends that a qualified technician perform the installation. Most local Tuner or exhaust and muffler shops offer professional installation.
Direct fit for 2020-2022 Toyota GR Supra L6-3.0L Turbo (A90/A91)
Dyno Proven power increase of 11 HP and 9 Lb.-Ft. of torque at the wheels
Manufactured from huge, mandrel-bent, 304 stainless-steel tubing
Performance Stepped design for maximum performance and velocity
Front and mid-section utilizing massive 3.50in (89mm) tubing
Rear section utilizes huge 3.00in (76mm) tubing
Oversized tubing reduces restriction providing increased airflow and performance
Injen’s dual oval, straight-through mufflers for exceptional sound and power output
Custom investment cast Y-Pipe equalizes flow for improved performance and sound
Integrated exhaust valve for normal (quiet) and sport mode (race inspired sound) operation
(Exhaust Valve uses factory motor – not included)
Beautiful V-Band clamps used for a simple, leak-free installation
Increase Throttle Response and Decreases Turbo Lag
Hand Crafted and TIG Welded to Perfection for Strength and Durability
Uses all factory mounting locations with factory-style hangers
Includes all necessary hardware for a hassle-free installation
Designed and manufactured in Pomona, CA
This part is not an emissions-related part and therefore can be used on Emission Controlled Vehicles without a CARB EO#.
Additional Parts available for the GR Supra: SES2300TT Dual Burnt Titanium tip Exhaust SES2300RS 3.50in single-exit exhaust EVO2300 Rotomolded Cold Air Intake SP2300 Traditional Aluminum Intake SES2300ICP Intercooler Charge Pipes PT0008B X-Pedal Throttle Controller
Item Requires Shipping
W19.0000” x H12.0000” x L47.0000”
Free Ground Shipping on orders over $200.00- 48 continental states