Additional Images

Injen SP Short Ram Cold Air Intake System (Wrinkle Black) - SP1351WB

SP1351WB
2019-2021 Genesis G70 V6-3.3L Twin Turbo
Was: $708.95
Sale: $531.71
Save: 25%
Save: $177.24

Qty:
Free Ground Shipping on orders over $200.00- 48 continental states

Description

The Genesis G70 is the performance luxury car that has taken the world by storm with its balance of sports car feel with the added benefit of extreme comfort while on the open road. Injen Technology has taken the new 2019-2021 Genesis G70 equipped with the 3.3L Turbo engine deep into our R&D lab to extract the hidden power potential inside the engine and what we have come up is nothing short of amazing.

The OE intake tract is very restrictive from the factory and limiting power output by choking the turbos. Our new SP1351 dual ram horn cold air intake opens that intake tract with large, stepped aluminum intake tubes that allows that turbo and engine to breathe deep, while keeping intake velocity up to produce the power that you have been craving.

The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open your Genesis G70 and let those turbos spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band.

Additionally, the SP1351 dual intake system includes twin, fully serviceable Injen SuperNano-Web dry air filters, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that is not enough, the Injen SP performance intake provides power you can hear and feel! On our dyno, the SP1351 dual intake system put down an impressive 16 additional horsepower and 18 pound-feet of tire-scorching torque!

This intake provides an aggressive and throaty tone that is unmatched in the aftermarket and one that you will enjoy every time you smash the accelerator! Want to add that personalized touch to your intake? You are in luck, as Injen also offers this intake system in three amazing finishes, SP1351WB (Wrinkle Black), SP1351WR (Wrinkle Red), and SP1351P (Polished Finish). To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

Prop 65 Compliance

This product can expose you to chemicals including Chromium, Nickel, Carbon Black, Bisphenol A/Epichclorohydrin Polmer & Cobalt, which are known to the State of California to cause cancer, and (Antimony [Oxide], Arsenic, Beryllium. Chromium (hexavalent), Cobalt Cadmium, Lead, and Nickel which is known to the State of California to cause birth defects or other reproductive harm.

Warranty

Injen Technology offers a Limited Lifetime Warranty to the original purchaser against defects in material and workmanship on all intake systems, air filters, and hydroshields. Injen Technology will replace, at no charge, any intake pipe, air filter, or hydroshield considered by Injen Technology to be defective. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology’s discretion. Proof of purchase is required. The warranty does not cover incidental or consequential damages, damages caused from improper installation, nor does it cover the cost of installation or removal of the defective part or its replacement. All warranty items must be sent freight prepaid with a valid RMA (Return Merchandise Authorization) number and copy of original invoice.

Key Features

  • Direct fit for
  • 2019-2021 Genesis G70 V6-3.3L Twin Turbo
  • Dyno Proven gains of up to 16 hp and 18 lb-ft. of torque
  • Short Ram Air Intake Design
  • Innovative Stepped Design allows for maximum airflow
  • Stepped from 3.00in to 2.50in to 2.25in 6061-T6 aluminum intake tubing
  • Dual mandrel-bent 6061-T6 aluminum intake tubing
  • Twin Fully serviceable Injen SuperNano-Web dry air filter
  • Replacement air filter part number X-1020-BB (Two Required)
  • Optional Hydroshield part number 1035BLK or 1035RED
  • Available in three amazing finishes –
  • SP1351WB (Wrinkle Black)
    SP1351WR (Wrinkle Red) and
    SP1351P (Polished Finish)
  • No additional tuning required
  • Aggressive engine tone under full throttle
  • Smooth intake piping eliminates restrictions and improves airflow
  • Made in Pomona California, USA
  • Injen Technology Limited Lifetime Warranty

Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Details

  • SP1351WB
  • SP1351WB
  • 843115028916
  • Injen Technology
  • New

Categories

Shipping Information

  • Item Requires Shipping
  • 10.0 lbs.
  • W13.0000” x H9.0000” x L36.0000”
  • Free Ground Shipping on orders over $200.00- 48 continental states

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.